GenTran 6-16-Circuit Indoor/Flush Mount Manual Transfer Switch

The industry's most versatile manual transfer switch. This generator transfer switch is ideal for powering essential appliances with a portable generator during a power outage. It accommodates 6 to 16 household circuits, and can be used with any portable generator up to 3750 watts @ 120 volts (continuous). Ideal for powering your furnace blower (gas or oil only), refrigerator and kitchen circuits, lights, and television. If your needs change, your installer can easily expand this transfer switch to up to 16 circuits just by adding more circuit breakers. The enclosure can be surface or flush mounted indoors. It incorporates off-the-shelf circuit breakers, so you don't have to search high and low for replacements, and your installer can reconfigure the breaker combinations to suit your family's needs. This transfer switch includes dual wattmeters to help you balance generator loads to prolong generator life. A 30 amp 125 volt male power inlet (NEMA L5-30) is included in the carton if a plug-in connection is desired in a dry location. Includes three 15-amp 1-pole breakers, and three 20-amp 1-pole breakers. Accepts Arc Fault and GFCI breakers. Listed with Siemens, Square D (HOM), Cutler-Hammer (BR) and GE (THQL) interchangeable type breakers. Made in USA. UL 1008 Listed in US and Canada.

Indoor/Flush Mount Manual Transfer Switch Features:

• Install like a subpanel
• Expandable to 16 circuits using interchangeable type breakers
• Reconfigurable using standard interchangeable type breakers
• Accommodate Arc Fault and GFCI breakers to meet 2008 NEC requirements
• Includes wattmeters to help balance generator loads (indoor models only)
• Power inlet included on most models for quick generator cord connection
• Some models include 30 and 50 amp breakers for connecting larger appliances like water heaters, air conditioners or electric ranges
• Indoor models can be Flush or Surface mounted
• Outdoor models features an Aluminum NEMA 3R rated enclosure with power inlet on bottom (except model 601210) for quick cord connection
• UL Listed with Siemens, Square D (HOM), Cutler-Hammer (BR) and GE (THQL) breakers
• Accommodates Surge Suppression (using surge suppression breakers)
• Requires a 2-pole 60 or 100 amp main breaker in existing load center to feed this transfer switch as a subpanel.
• UL Listed to UL 1008.
• Made in USA
• This unit is designed and rated for 125 volt loads only; and single pole circuit breakers should be used in this unit. Total load must not exceed 3750 watts.

Includes:

• 30 amp 125 volt male power inlet (NEMA L5-30) is included if a plug-in connection is desired in a dry location.
• (3) 15-amp 1-pole breakers
• (3) 20-amp 1-pole breakers